If your engine management light come on now and then, or losing power, then the EGR valve is most probably to blame. It fit's the MK7 and Fit's between the egr cooler (gear box end) and the EGR valve. The EGR valve is not that easy to get at, so the plate is slotted to make it simple to fit. It is easier to get to from under the van on the rear wheel drive, were it has clear access on the rear wheel drive. The bolts just need to be loosened, the plate slipped in, the re-tightened. Please note that the EML (engine management light) will come on, but will not go into limp mode. When fitted, some times the EGR valve needs to be unplugged to get the right results. So as not to have the EML come on, the ECU would need to be reprogrammed not to use / look for the EGR valve.
Fitment:
It does not fit on the mixer on the inlet manifold ( it looks like a valve). The engine will not start if you do!
MK7 Transit which came in from 2006, 2.2 2.4 3.2 TDCi PUMA engine with the EGR type below
LAND ROVER 2007 ON with the 2.4 PUMA engine 2007 onward
CITROEN RELAY & JUMPER 2.2HDi 2006 ON With 2.2 PUMA engine
FIAT DUCATO 2006 ON 2.2 JTDM
PEUGEOT BOXER 2006 ON
Other Benefits of blocking EGR:
1. Cleaner engine oil helping to give longer engine life
2. Turbo spooling up quicker, and at lower revs
3. Prevents soot build up in intake manifold, and valve's, which will lower the power
4. Smoother drive and quit often better economy
5. Less smoke if the EGR valve is faulty (black smoke is a MOT failure)
Package included:
1x Plate
Shipping Details:
Free Shipping.
Estimated Time of Arrival: 3-6 days.
24-Hour Expert online
Lovely it looks so beautiful on the car 🚗
The listing description was spot on.
Good value for the price, would buy again.
EGR Valve & Cooler Blank Kit for MK7 Mk8 TRANSIT 2.2 2.4 3.2 TDCi Duratorq ZSD-422/4
a reliable part that stands up to daily use
I installed a short ram intake and the EGR pipe was in the way. This delete kit cleaned up the engine bay and allowed the intake to fit perfectly.
My Delica used to run hot on long climbs. Deleting the EGR lowered my EGTs significantly. Engine temp stays nice and cool now.
Finally got rid of that annoying 'Reduced Engine Performance' message!
My Del Sol was suffering from a rough idle and occasional stalling after removing the EGR system. This IAC delete plate solved all of that. The included ports are well-machined. It completely eliminated the check engine light related to the EGR valve. Feels like the throttle response is crisper too. Great quality piece for the price.
Great product and support.
Shipped fast
Part arrived in perfect condition exactly as ordered and fit perfectly.
The truck runs smoother now, throttle response feels much better.
Quality part at a very good price
Preislich und Qualitativ absolut zu empfehlen
Excellent Product Performance, Perfect Fit!
Good quality and easy to install. The bolt holes lined up perfectly and it came with the gasket, so I didn’t need to buy extra.
The fitment was perfect for my PX2 Ranger 2.2L. Took less than an hour to install with basic tools. No modifications needed, and it sealed perfectly against the intake manifold. Great quality for the price!
I’ve had trouble with the EGR valve and cooler before, and this kit completely solved the issue. I no longer have to worry about EGR failure or related issues.
The customer service team was great, answering all my questions about compatibility and installation.
So far so good.
Very satisfied and will be ordering again
NOT BAD
thank you
Shipping was quick, and the part arrived well packed with no damage.
Professional-grade quality at a reasonable price. My mechanic approved.
Working great
Excellent
Took me just 30 minutes to fit with basic tools.
Solved my rough idle and CEL problems. Quality plates, no leaks. Works exactly as advertised!
Designed for excellence, this part won’t disappoint.
Come fast and look great.