Ford Euro 3 Transit Connect Focus Mondeo 1.8 TDDI TDCi AGR-Ventil-Blindplatte

$11.78 USD

Artikelnummer: C183-A218

Kostenloser und schneller Versand

Sicherer und vertrauenswürdiger Handel

Es besteht aus 1,5 mm dickem Edelstahl. Es wurde gerumpelt, um es glatt zu machen und eine raue Oberfläche zu erhalten, die außerdem zu einer besseren Abdichtung beiträgt und alle scharfen Kanten entfernt.
Es sorgt für eine sauberere Beschleunigung bei niedrigeren Drehzahlen, da es die Abgasrückführung unterbindet. Wenn das AGR-Ventil nicht richtig funktioniert, kann die Verbesserung bei diesen Motoren ziemlich dramatisch sein. Die Motorkontrollleuchte sollte nicht aufleuchten (mir wurde noch nie eine gemeldet), daher ist kein Loch erforderlich, weshalb ich keines aufliste.

Schlitz, um die Montage zu erleichtern. Lösen Sie einfach die beiden Schrauben, schieben Sie die Platte zwischen den Ansaugkrümmer und die Dichtung und ziehen Sie die Schrauben fest. Alle Rohre und der elektrische Stecker (sofern vorhanden) bleiben an Ort und Stelle. Das Ende des Auspuffkrümmers kann ebenfalls montiert werden (sofern es nicht über die Ringklemmenverbindung verfügt, die manche haben), aber die Schrauben könnten verrostet sein.

Dies passt nur in den oben abgebildeten Euro3-AGR-Ventiltyp mit Unterdruckbetrieb, und zwar in:

Ford Connect 1.8 TDDi TDCi ab 2002. Beachten Sie, dass die Euro 4-Norm erst 2005 eingeführt wurde, einige Euro 3-Modelle jedoch noch Anfang 2007 verkauft wurden.
Ford Focus MK1 1.8 TDDi TDCi 1998- 2005
Ford Mondeo MK2, MK3 1996-2006

Vorteile der AGR-Blockierung:
1. Saubereres Motoröl sorgt für eine längere Lebensdauer des Motors.
2. Turbo startet schneller und bei niedrigeren Drehzahlen
3. Verhindert Rußablagerungen im Ansaugkrümmer und in den Ventilen, die die Leistung verringern
4. Sanfteres Fahren und häufiges Aufhören, bessere Wirtschaftlichkeit
5. Helfen Sie, die MOT zu bestehen, da die schwarze Rauchentwicklung getestet wird für

Lieferinhalt:
1x Platte


Versanddetails:
Kostenloser Versand.
Voraussichtliche Ankunftszeit: 3–7 Werktage.

Garantie:
Kunden haben das Recht, innerhalb von 60 Tagen nach Erhalt des Pakets eine Rückgabe zu beantragen.
24-Stunden-Experte online

  • 5 stars: 148 (94%)
  • 4 stars: 10 (6%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
D
Demetrius Mack

Lovely it looks so beautiful on the car 🚗

M
Martin

The listing description was spot on.

s
sherry

Good value for the price, would buy again.

L
LIN

EGR Valve & Cooler Blank Kit for MK7 Mk8 TRANSIT 2.2 2.4 3.2 TDCi Duratorq ZSD-422/4

D
Daniel Noll

a reliable part that stands up to daily use

P
Paul F.

I installed a short ram intake and the EGR pipe was in the way. This delete kit cleaned up the engine bay and allowed the intake to fit perfectly.

P
Paul Fuszard

My Delica used to run hot on long climbs. Deleting the EGR lowered my EGTs significantly. Engine temp stays nice and cool now.

A
Anonymous

Finally got rid of that annoying 'Reduced Engine Performance' message!

R
Ronald Baril

My Del Sol was suffering from a rough idle and occasional stalling after removing the EGR system. This IAC delete plate solved all of that. The included ports are well-machined. It completely eliminated the check engine light related to the EGR valve. Feels like the throttle response is crisper too. Great quality piece for the price.

A
Anonymous

Great product and support.

J
Jason

Shipped fast

J
John L
As ordered

Part arrived in perfect condition exactly as ordered and fit perfectly.

J
John Cook

The truck runs smoother now, throttle response feels much better.

M
Mike Kennedy
Great service and great quality

Quality part at a very good price

A
Andre Lebrun
Gute Qualität

Preislich und Qualitativ absolut zu empfehlen

P
Pierre Heron

Excellent Product Performance, Perfect Fit!

J
John Cook

Good quality and easy to install. The bolt holes lined up perfectly and it came with the gasket, so I didn’t need to buy extra.

C
Chet

The fitment was perfect for my PX2 Ranger 2.2L. Took less than an hour to install with basic tools. No modifications needed, and it sealed perfectly against the intake manifold. Great quality for the price!

C
Chet

I’ve had trouble with the EGR valve and cooler before, and this kit completely solved the issue. I no longer have to worry about EGR failure or related issues.

A
Anonymous

The customer service team was great, answering all my questions about compatibility and installation.

A
Anonymous

So far so good.

C
Christian Jordan

Very satisfied and will be ordering again

A
Anonymous

NOT BAD

B
Ben Cope

thank you

A
Anonymous

Shipping was quick, and the part arrived well packed with no damage.

D
Drew Nguyen

Professional-grade quality at a reasonable price. My mechanic approved.

A
Anonymous

Working great

M
Mark Benn
Excellent

Excellent

M
Mark Benn

Took me just 30 minutes to fit with basic tools.

A
Anonymous

Solved my rough idle and CEL problems. Quality plates, no leaks. Works exactly as advertised!

P
Pierre Heron

Designed for excellence, this part won’t disappoint.

D
Daniel Noll

Come fast and look great.